Some builders play it safe and keep their towers upright. Not Robieen, whose The Leaning Tower of Pisa leans exactly 4 degrees on purpose, just like the marble original that pulls more than 5 million visitors to Pisa every year. This LEGO® Ideas project has gathered 8,182 supporters, and once you see the tilt, you will understand why.

Here is the part that made this builder grin. To keep that 4-degree lean stable, Robieen engineered a foundation angled to precisely match, strong enough to hold the whole tower without letting it topple. Building something that leans and does not collapse is a genuinely tricky bit of engineering, and pulling it off in bricks deserves a round of applause. Have you ever tried to make a LEGO® wall tip over and stay put on purpose?

Advertisement

At roughly 1 to 100 scale and just under 4,800 pieces, this tower packs in the architectural detail. The rounded walls connect to one another and to every curved section, so the whole structure locks together into one sturdy shell (no cracks to spoil the view inside). Peek within and you will find a spiral staircase modelled on the real one, complete with over half of the actual steps needed to climb to the top.

Robieen thought about the windows and doors too, placing each one to match the real tower so you can look out from the right spots. And because the interior curves and stairs keep changing, the build never turns into a repetitive slog. Most sections go together differently, which adds strength and keeps your hands busy. Best of all, your minifigures can hold the tower steady so it will not tip, which is either a helpful play feature or a very small structural joke.

The project sits in the gathering support phase and needs 10,000 supporters to reach the LEGO® Ideas review stage. If a leaning landmark that refuses to fall over sounds like your kind of challenge, back The Leaning Tower of Pisa and help it stand tall. Or, well, stand slightly sideways.